InFocus LP750 User Manual page 13

audio cable
mouse cable
Connecting the CableWizard audio and mouse cables to a laptop computer
If your computer has a USB connector and is running Windows 98,
use the USB mouse cable
1 Plug the
the mouse connector on your computer.
2 Plug the end of the CableWizard mouse cable into the
connector on the CableWizard.
You must have the appropriate USB drivers installed on your
computer to use the USB feature. Windows 98 ships with the
appropriate drivers.
Now you're ready to power up the projector and your laptop.
Skip to "Powering up the Projector and Adjusting the Image" on
page 15.
end of the CableWizard mouse cable into
F 7
IGURE
NOTE: The USB mouse is sup-
ported for use with Windows 98
only.
NOTE: A USB mouse is hot-plug-
gable, meaning you do not need to
re-boot your computer after con-
necting the mouse to use it. A PS-2
mouse is not hot-pluggable.
9