InFocus LP750 User Manual page 53

M a i n t e
WARNING: Do not drop the
lamp module or touch the glass
bulb! The glass may shatter and
cause injury.
38
n a n c e &
F 30
IGURE
Removing the lamp module
7 Align the new lamp module in the correct direction.
8 Gently push the module in as far as it goes.
9 Tighten the screws on the outside of the module.
10 Reposition the lamp door.
11 Tighten the lamp door screw.
12 Plug in the power cord and turn the projector back on. The
lamp monitor light and lamp hour counter in the Status menu
are automatically reset.
T r o u b l e s h o o t i n g