InFocus LP 750 LiteMount Installation Manual page 3

CEILING MOUNT INSTALLATION GUIDE
The LP 750 LiteMount
your projector from the ceiling for fixed installa-
tion use in meeting, auditorium and training
room settings. A unique quick-release feature
allows you to take the projector down in seconds
to replace the lamp or move the projector to
another location.
You must determine the suitability of this prod-
uct for your intended use and assume all risk
and liability in connection therewith. In Focus
recommends that a professional contractor or
other facilities professional assist you in mount-
ing this device. Be sure to take precautions to
meet all local building codes.
Additional LiteMount Products
In Focus offers two additional LiteMount prod-
ucts that may make your ceiling mount installa-
tion easier.
The LiteMount False Ceiling Plate
•
(
SP-LTMT-PLT
ings with acoustic tiles. It mounts in your ceil-
ing in place of a ceiling tile. It is pre-
assembled with threaded studs to install the
LiteMount brackets, and includes the neces-
sary hardware to attach to the brackets.
The LiteMount Pipe Tubing Extension (
•
) allows you to install the projector
LTMT-EXT
in a room with a high ceiling. With the exten-
sion, you can place the projector from 24"
(61 cm) to 46" (117 cm) from the ceiling (12"
to 24" with cut).
Contact your In Focus dealer to order these
products.
makes it easy to hang
TM
) is designed for suspended ceil-
WARNING: This installa-
tion must be performed in
compliance with your local
building code require-
ments. Local require-
ments take precedence
over any instructions given
in this guide.
SP-
1