Figure 13. Rv5 Oil- Sealed Vacuum Pump And Associated Traps (Top) - Agilent Technologies G6600-90006 Operation And Maintenance Manual

Gas ballast
Inlet & valve
Pump exhaust
Retractable handle
Chemical
Oil fill caps
Pum p inlet Trap
Figure 13 RV5 Oil- Sealed Vacuum Pump and Associated Traps (Top)
Sometimes water condensation and accumulation are visible in the exhaust line. This is
NO TE
normal. However, do not allow water to continue to accumulate after approximately one
week of operation. Significant water accumulation may indicate improper pump operation,
an improperly vented exhaust line, or a Burner leak. Water accumulation in the exhaust line
can cause damage to the pump, especially if allowed to fall back into the pump. Contact
Agilent for advice if water accumulation continues to occur.
50 Operation and Maintenance Manual