Table of Contents
Advertisement
I S TECHNOLOGY SOLUTIONS
To prepare for the 4 Pressure End-Of-Car Daily Test:
1. Connect the coalescing filter to the SUPPLY fitting on the Brake Pro™.
2. Connect the shop air supply hose to the coalescing filter. Supply must be greater than the
Operating pressure (90psi).
3. Connect the BLACK Brake Pipe hose with Gladhand to the Brake Pipe fitting on the Brake
Pro™.
BLUE
4. Connect the
5. Connect the YELLOW
YELLOW
Pro™.
6. Connect the
GREEN
7. Insert the Dummy Coupling with Pressure Tap into the Brake Pipe Gladhand.
8. Connect the Downstream BC Hose to the pressure tap on the dummy coupling.
9. Run the Daily Test on the application from the Main Menu and select 4P EOC.
10. When finished, disconnect the hose from the dummy coupling pressure tap. Remove the
dummy coupling from the gladhand.
To prepare for the 4 Pressure Adapter Daily Test:
1. Connect the coalescing filter to the SUPPLY fitting on the Brake Pro™.
2. Connect the shop air supply hose to the coalescing filter. Supply must be greater than the
Operating pressure (90psi).
3. Connect the BLACK Brake Pipe hose with Gladhand to the Brake Pipe fitting on the Brake
Pro™.
4. Connect the
BLUE
5. Connect the YELLOW
YELLOW
Pro™.
GREEN
6. Connect the
7. Connect the BLACK Downstream Brake Cylinder Hose to the Downstream BC fitting on the
Brake Pro™.
8. Connect the BLACK 4P Adapter Hose to the 4P Adapter fitting on the Brake Pro™.
9. Connect the Brake Cylinder Hose, Auxiliary Hose, Emergency Hose, and 4P Adapter Tube to
the quick-connect fittings on the 4 Pressure Adapter.
10. You will also need the Adapter Blanking Plate for the Daily Test, but this should not be mounted
to start the Daily Test. You will be prompted during the test when to attach the blanking plate to
Auxiliary Reservoir Hose to the Auxiliary fitting on the Brake Pro™.
Emergency Reservoir Hose to the Emergency fitting on the Brake
Brake Cylinder Hose to the Brake Cylinder fitting on the Brake Pro™.
Auxiliary Reservoir Hose to the Auxiliary fitting on the Brake Pro™.
Emergency Reservoir Hose to the Emergency fitting on the Brake
Brake Cylinder Hose to the Brake Cylinder fitting on the Brake Pro™.
7
Advertisement
Table of Contents
