Running The Single Car Test; Car Setup - I S TECHNOLOGY SOLUTIONS BRAKE PRO S-4027 Operating Manual

I S TECHNOLOGY SOLUTIONS

Running the Single Car Test

Select Single Car Test from the Main Menu and press NEXT to continue.
The Operator will then be prompted to choose the testing method. The options are 2P EOC, 4P EOC
and 4P Adapter. The screen shows the last time the Daily Test for each testing method was passed.
The program will only let the operator test with a method that has successfully passed the Daily Test
in the last 24 hours.

Car Setup

Once the testing method is selected, the Test Setup Screen is shown. This screen allows the operator
to see the parameters for the car to be tested. Choose Car Serial # to enter the car number.
On the next screen the keyboard will pop up to enter the number. Then press NEXT to continue.
15