CareWise C-Trak Apollo User Manual page 21

Click 'Select' to connect the software to the
selected Apollo Handset device.
Once connected, the software will return to the main Counts
screen and the top LED on the Apollo Handset keypad will be
illuminated in steady blue (not flashing).
The Apollo Handset will enter 'Sleep' mode after a period of
inactivity (five minutes). The handset can be woken up by moving
it, after which it will start counting again. Note that a timed count
cannot be started whilst the handset is in sleep mode.
Figure 26 –Information shown on screen when the
highlighted available device has been selected
after pressing the Select button
Figure 27 – Main Counts Screen showing the summary
information related to the connected device
Figure 28 – On screen notification that the Apollo handset
has entered a sleep mode after five minutes of inactivity
21