Advertisement
To Delay start
DD24 models only
To restart delay start:
https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Single/DD24SCHTX9/Quick_Start_Guide_DD24SC...
again. The wash stage indicator and
(Double models) will flash.
• Wait for the 3 short and one long tone before opening the drawer.
Forcing it open mid cycle may cause damage or injury.
• If the drawer is not restarted within 7 minutes it will tone intermittently
until it is restarted.
1. Press and hold
until
appears on the display, then release. You are now in Delay start
mode.
2. Press
until the display shows the number of hours you want to delay the
start of a wash by (1 to 12 hours).
If you scroll past 12 hours the dishwasher will exit Delay
start mode. To re-enter delay start follow step 1 above.
• The wash will start once the delay time is over, provided the drawer is
closed.
If the drawer is opened after delay start has been set (for example if you
need to load more dishes), delay start will be paused after the drawer is
closed.
Close the drawer.
Updated: Tue, 16 Nov 2021 11:47:59 GMT
Powered by
3
Advertisement
