Basic Settings; Program Steps - novomatics AlphaTackPlus Owner's Manual

Novomatics Operation Manual
5.2.2.

Basic Settings

For advanced testing conditions please press Basic tab in this dialog. Define sample volume,
manner of ink film creation, temperature stabilization conditions within this dialog.
Figure 10
5.2.3.

Program steps

The program run can be checked and modified at Measurement/Programs/Steps.
The program is organized in steps. For every step the parameter can be set separately.
Usually the temperature should not be changed within a measuring program, so please set
all temperature set point to the equal value.
For adding new steps at list end use the add button. For inserting steps after list selection
use the insert button. For deleting steps use the remove button. Press change for taking over
changed values into step press change button.
AlphaTackPlus
18