Download Print this page

Hanover GFM00130Z Assembly Instructions Manual

Steel pergola

Advertisement

Quick Links

GFM00130Z
Outdoor Furniture
IMPORTANT
If you have any problems with this product (missing or damaged parts, assembly issues, etc.),
PLEASE DO NOT RETURN TO THE RETAILER/STORE
where you purchased the product.
1-866-988-3300
Please call our Toll-Free Customer Service Hotline at:
Between 8:00 AM and 5:00 PM Pacific Standard Time, Monday through Friday
To expedite any future warranty claims, please retain the instruction sheet, warranty card
and receipt for future use.
Care and Maintenance
Store furniture in an upright position. Be careful not to allow water to build up in frames, as this will cause
corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and water.
Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a liquid wax
for maximum protection against UV rays and/or salty, damp air. If your set includes cushions, slings, and/or
an umbrella, they may be cleaned by hand with a solution of soap and water with a clean water rinse.
(Never machine wash cushions, slings or umbrella covers as this will result in shrinkage or damage). After
cleaning cushions, tip on end and allow to drip dry. (Never use a commercial or home dryer to tumble dry
fabric goods). Do not use bleach or solvents to clean any product! This will void the warranty.
8

Advertisement

loading

Summary of Contents for Hanover GFM00130Z

  • Page 1 GFM00130Z Outdoor Furniture IMPORTANT If you have any problems with this product (missing or damaged parts, assembly issues, etc.), PLEASE DO NOT RETURN TO THE RETAILER/STORE where you purchased the product. 1-866-988-3300 Please call our Toll-Free Customer Service Hotline at:...
  • Page 2 GFM00130Z Outdoor Furniture 1-Year Limited Warranty Program For a period of one (1) year after date of purchase, the Manufacturer will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between the Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase.
  • Page 3 Assembly Instructions GFM00130Z Steel Pergola Questions, problems, or missing parts? Before returning to the store, call Customer Service. 1-866-988-3300 8 a.m. -5 p.m., PST Monday - Friday Retain this manual for future use.
  • Page 4: Parts And Tools

    GFM00130Z Parts & Tools PART PICTURE & DESCRIPTION PART PICTURE & DESCRIPTION Front horizontal bar 10+1 M6*18mm screw Back horizontal bar 14+1 M6*15mm screw Sliding bar M6x32mm screw Connector bar 22+2 M6×62mm screw Middle sliding bar Canopy 2 Post leg 14+1 ST4.2*12mm screw...
  • Page 5 GFM00130Z WARNING: To avoid damage of this production, please use either the carton or another soft surface such as carpet as a Post leg base cover working surface to prevent product damage during assembly. Decorative kit 1 Need for assembly: Decorative kit 2 WARNING: Please keep children out of the assembly area before assembly.
  • Page 6 GFM00130Z Pergola Assembly Step 1:  Attach the post base plates (J) to the post leg (F) using M6x15mm screw (R).  Insert the post leg (F) into the post leg base cover (J1). Step 2:  Remove the foam from the sliding bar(C) and middle sliding bar (E).
  • Page 7 GFM00130Z  Attach the decorative kit 2(N) to the sliding bar (C) and middle sliding bar (E) using ST4.2*12mm screw. Step 4:  Attach the decorative kit 1(M) to the front horizontal bar (A) using ST4.2*12mm screw. Step 5:  Attach the decorative kit 1(M) to the back horizontal bar (B) using ST4.2*12mm screw.
  • Page 8 GFM00130Z connector bar (D) to the front horizontal bar (A) and back horizontal bar (B)in the order of (C),(D),(E),(D),(C) using M6*62mm screw(T). Step 8:  Attach the frame made in step 7 to the post leg (F) using M6*62mm screw (T) as shown.
  • Page 9 GFM00130Z  Insert rail beam 2(I1) into rail beam 1(I) as shown.  Insert M6*32mm screw into the rail beams ( I&I1) as shown. Step 10:  Attach the canopy 2(U) to the sliding bar (C) using M6*15mm screw (R) as shown.
  • Page 10 GFM00130Z...

This manual is also suitable for:

Reedperg-gry