Advertisement
Quick Links
LOW RIDER
Digital Electric BrewSculpture™ Manual
SAFETY WARNING
Electric BrewSculptures™ are designed to be used with a GFCI.
Hot water and high current are dangerous and can lead to serious
injury or death. Please practice safe brewing at all times.
Table OF Contents
PAGE 1........................................................Intro & What's Included
PAGE 2..........................................Assembly Requirements & Tools
PAGE 2 – 3........................................Setting Up Your BrewSculpture
PAGE 3 –10........................................................................Brew Day
PAGE 11..........................................................Cleaning & Sanitizing
PAGE 11–12...............................................................................FAQ
PAGE 12..........................................................................Tips & Tricks
What's Included
S
o you've just received your Single-Tier BrewSculpture
a kid during their birthday, you've torn through the wrapping
and have all of your new toys lying in front of you. Once you've
gotten through it all, take stock of the items listed below:
1 x Stainless Steel Single-Tier Stand
3 x Stainless Steel BrewBuilt
1 x False Bottom Screen For Mash Tun
1 x Stainless Steel Sparge Arm Assembly
1 x Copper Heat Exchanger
2 x March Pump Assemblies
1 x Whirlpool Assembly for Boil Kettle
6 x Tubing Setups
1 x Wheelbarrow Arm (Under Boil Kettle)
2 x Wheels
2 x SlingBlade
Electric Elements (4 x 1 BBL System Only)
™
1 x Control Panel
1 x Bottom Box for Power Distribution (L6-30 Connections)
2 x Hot Liquor Tank/Boil Kettle Float Switch/Temp Probe Assemblies
1 x Sparge Arm Float Switch/Temp Probe Assembly
1
, and like
™
Kettles
™
Advertisement
Related Manuals for BrewBuilt BrewSculpture LOW RIDER
Summary of Contents for BrewBuilt BrewSculpture LOW RIDER
- Page 1 Once you’ve gotten through it all, take stock of the items listed below: 1 x Stainless Steel Single-Tier Stand Digital Electric BrewSculpture™ Manual 3 x Stainless Steel BrewBuilt Kettles ™ 1 x False Bottom Screen For Mash Tun...
- Page 2 ASSEMBLY REQUIREMENTS SETTING UP IMPORTANT NOTE: With all of the included items and tools in front of you, you’re ready to Your Digital BrewSculpture does not include ™ setup your BrewSculpture. Let’s start at the right of the BrewSculpture, an extension cord for the control panel because we do not know how far and work our way to the left…...
- Page 3 The left kettle location is going to be where your boil kettle goes. With BREW DAY this kettle in front of you, we’ll want to install four things: Two ball valves and quick disconnects, the 3" Face x 2" Probe thermometer, and the stainless steel whirlpool/maximizer.
- Page 4 BREWSCULPTURE ANATOMY HEAT SPARGE EXCHANGER HOT LIQUOR TEMPERATURE TANK PROBE/FLOAT MASH TEMPERATURE PROBE/FLOAT BOIL KETTLE WHIRLPOOL PORT BOTTOM FOLDING HANDLE STAND PUMP 2 PUMP 1...
- Page 5 FLOW OF TUBING With all of your kettles setup, all other items in front of you, and a crav- ing to brew like you’ve never had before, let’s get started! There are FOR STRIKE different grist ratios that work well for different brewers and brewer- ies.
- Page 6 Your sculpture has the option of preheating your water for you. Once you • Press the delayed start button are comfortable with your installation you can program it to start when • Set your delayed time in 1/10th of an hour increments. For this test you are not there.
- Page 7 Before we mash in we will set up the mash schedule into the Mash FLOW OF TUBING FOR Screen. RE-CIRCULATING MASH • Press Mash Mode • Enter the time for the first step • Press Enter • Enter the temperature for the first step •...
- Page 8 FLOW OF TUBING The conversion from mashing to sparging is rather simple. Close the mash tun’s ball valve, FOR SPARGING as well as the ball valve on the March Pump and sparge arm. Move the tubing running from the mash tun’s ball valve to the hot liquor tank ball valve.
- Page 9 FLOW OF TUBING FOR WHIRLPOOL RE-CIRCULATION If you set the power slider on the Sparge Screen to 50% it will keep your HLT warm while preheating the boil. It will not turn on the boil element till the float switch reads UP and it will kill the HLT element when the HLT float reads DN.
- Page 10 HOW THE CONTROL PANEL WORKS At the end of the boil, we’ll turn the element off and allow the whirlpool to run for 1–2 minutes. After the 1–2 minutes is up, you can turn the pump off, and allow the whirlpool to settle. The reason we •...
- Page 11 Cleaning and drying your kettles and frame shouldn’t be too difficult. CLEANING & SANITIZING Something to keep in mind is that cleaning your equipment right away will make it easier, and will help keep your BrewSculpture looking ™ newer for longer. After your brew day, clean up your equipment as soon Cleaning is one of the last things that anyone wants to do after finishing as possible! To allow your kettles to completely drain/dry out, you can a brew day, but anybody that’s put it off before will tell you, it’s much...
- Page 12 CALIBRATING YOUR DIGITAL PROBES Question: My BrewSculpture doesn’t have a wort chiller – why not? There are two methods for calibrating your digital probes depending on Answer: A wort chiller is an item that many brewers may have prior to how accurate your needs are.
Need help?
Do you have a question about the BrewSculpture LOW RIDER and is the answer not in the manual?
Questions and answers