5.5 SOSTITUZIONE SPINA DI TRANCIAMENTO
(SOLO VERSIONE RINVIO FISSO)
Fig.27
- Asportare la camma A togliendo l'anello di sicurezza
B.
- Togliere l'anello ferma spina C, eliminando i fram-
menti residui della spina tranciata.
- Introdurre la nuova spina di sicurezza D.
- Rimontare l'anello fermaspina C.
- Rimontare la camma A con relativo anello di sicu-
rezza B.
ATTENZIONE! Effettuata l'operazione di sostitu-
zione della spina di tranciamento prima di riavviare
tamburo-coclea non sia intasato.
In tale circostanza procedere come indicato al
par.3.3.
Manuale di Uso e Manutenzione
Use and Maintenance Manual
5.5 REPLACING THE SHEAR PIN
(FOR MACHINES EQUIPPED WITH FIXED RETURN
TRANSMISSION)
Fig.27
75
SERIE
SERIES
- Remove cam A, removing the ring B.
- Remove the stop pin ring C, removing the remaing
fragments of the sheared pin.
- Insert the new shear pin D.
- Replace the stop pin ring C.
- Replace the cam A with the ring B.
WARNING! Having completed shear pin replace-
ment, check that the bowl-scroll system is not
If it is, follow the instructions laid out in par.3.3.
MAIOR
HS
D
C
B
A
Fig.27