Cooking Modes; Knead - CookingPal Multo User Manual

12.0 Cooking Modes

1� Tap "Cooking Modes"� Scroll on the display or rotate the jog dial to find the desired cooking mode including
Knead, Steam, Sauté, Scale, Keep Warm and Manual�
2� Tap on the mode or press the jog dial to select the mode�
NOTICE To quickly switch to Guided Cooking, tap "Guided" on the top left side of the Hub�
12.1

Knead

TIMER
00 45
NOTICE
• Do not use the butterfly whisk when using the
Knead mode�
• Only a maximum of 1�8 lbs (800 g) of dough can
be mixed at a time�
MIN SEC
• To prevent the appliance from overheating, do
not run Knead mode for more than 2 minutes
after each kneading session and allow at least 10
minutes before next use�
The mode is intended for kneading a dough�
1� Place the ingredients for the dough into the mixing
bowl and lock the lid�
2� On the Hub, tap the timer on the left side,
then scroll or use the jog dial to set the timer
(1 second - 2 minutes)�
3� Tap "Start" to start kneading� Press "Pause" to stop
and "Resume" to continue kneading�
4� Kneading is finished when the countdown is over�
Cooking Modes 35