CookingPal Multo User Manual page 15

• Never leave the CookingPal® Multo
while it is running�
•
NOTICE Damage Risk
If the main unit is connected to an unsuitable power
supply, it will get damaged�
• Only operate the CookingPal® Multo
alternating current voltage of 114-126 V and main
frequency of 50 to 60 Hz, as indicated on the plug
label�
NOTICE Damage Risk
Never place CookingPal® Multo
furniture and fittings (shelving units, wall units or
similar), while in use� Doing so may result in property
damage�
• Ensure that there is sufficient clearance above
and around the CookingPal® Multo
account the additional height when using the
steaming tray and lid�
unattended
TM
with the
TM
directly under
TM
, taking into
TM
1� Always place the CookingPal® Multo
solid, and flat horizontal surface so that it cannot
slip�
2� Ensure that the ventilation opening on the back
of the appliance is kept clean (free of grease
splashes, etc�)�
3� Remove the protective foil from the Smart Kitchen
Hub�
4� Do not use the CookingPal® Multo
extension cord�
5� Do not place the main unit on top of the power
cord� If you do, it will not rest evenly on the
surface�
Choosing the Setup Location
on clean,
TM
with an
TM
15