The Firmware Upgrade Utility - IOGear MiniView Extreme GCS1732 User Manual

The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides a smooth, automated process
for upgrading the KVM switch's firmware.
The Utility comes as part of a Firmware Upgrade Package that is specific for each device. New firmware
upgrade packages are posted on our web site as new firmware revisions become available. Check the
web site regularly to find the latest packages and information relating to them:
http://www.iogear.com
Before You Begin
To prepare for the firmware upgrade, do the following:
1.
From a computer that is not part of your KVM installation, go to the IOGEAR support site and select
the product part number (GCS1732 or GCS1734) to get a list of available Firmware Upgrade
Packages.
2. Choose the Firmware Upgrade Package you want to install (usually the most recent), and download
it to your computer.
3. Use the Firmware Upgrade Cable provided with this unit, to connect a COM port on your computer
to the Firmware Upgrade Port of your switch.

The Firmware Upgrade Utility

28