Advertisement
Operating Instructions
1. Once the Fan has been fully assembled plug the power cord into a power
outlet and switch the outlet on.
2. Select the desired speed with the control panel:
0 - Off
1 – Low speed
2 – Medium speed
3 – Maximum speed
3. To turn the Fan off, press the "0" button and then switch off and remove the plug
from the socket.
Horizontal Oscillation (right-left): Press the oscillating knob (9) down to activate.
To stop the motion and keep the Fan still, pull the oscillation knob up.
Tilt (high-low): Adjust the tilt angle and by tilting the head of the Fan. You will hear
the Fan click into one of the 3 available positions.
CAUTION: Only select one speed setting at a time.
AFTER SALES SUPPORT AU
1300 777 137 NZ
0800 824 556
service@unclebills.com.au
09
Advertisement
