Related Manuals for Prinetti IA5007A
Summary of Contents for Prinetti IA5007A
- Page 1 OSCILLATING TOWER FAN WITH REMOTE CONTROL IA5007A INSTRUCTION MANUAL Please read and save all instructions to ensure safe and effective use of this Appliance...
-
Page 2: Table Of Contents
Contents Important Safety and General Instructions Parts List Diagram Getting Started Assembly Instructions Operating Instructions Other Useful Information Warranty Information 02 AFTER SALES SUPPORT AU 1300 777 137 NZ 0800 824 556 service@unclebills.com.au... -
Page 3: Important Safety And General Instructions
Always follow basic safety precautions and accident prevention measures when using an electrical product. Read all instructions before using the Prinetti Oscillating Tower Fan with Remote ® Control. - Page 4 Important Safety and General Instructions (cont.) 14. To reduce the risk of electrocution, never operate this product with wet hands, submerge underwater or spill liquids into the product. 15. Do not leave the Fan unattended when in use. 16. Do not place the appliance near a hot gas or electric burner. 17.
-
Page 5: Parts List Diagram
Parts List Diagram Remote Control Control Panel OFF Button SPEED/ON Button Oscillate Button Timer Button Mode Button Remote Control Control Panel LED Indicator Panel Front Grille Fan Body Power Cable Fan Base 2 x AAA Batteries (not pictured) AFTER SALES SUPPORT AU 1300 777 137 NZ 0800 824 556 service@unclebills.com.au... -
Page 6: Getting Started
Getting Started Before First Use Prior to using your Fan, please read all safety and operating instructions thoroughly. Please ensure you follow the steps below before using this Fan. We recommend you keep the original packaging for storing your Fan when not in use. Unpack the product but keep all packaging material until you have made sure your new Fan is undamaged and in good working order. -
Page 7: Assembly Instructions
Assembly Instructions NOTE: The Fan can be used only when completely and correctly assembled, that is complete with its base and support. Remove all parts of the Fan from the gift box and lay out in front of you. The body of the Fan comes pre-assembled and does not require any further assembly. -
Page 8: Operating Instructions
Operating Instructions Once the Fan has been fully assembled plug the power cord into a power outlet and switch the outlet on. The Fan will beep once to indicate it is in standby mode. Remote Control The Fan has a remote control that allows for remote operation of the Fan’s functions. When using the remote control ensure that you are in eyesight of the Fan and are pointing the remote control directly at the Fan. - Page 9 Operating Instructions (cont.) • To turn the Fan off, press the OFF button on the control panel. To use the remote control to power the Fan on or off, follow the above directions and use the corresponding buttons on the remote control. Speed Selection •...
- Page 10 Operating Instructions (cont.) Continue to press the TIMER button to increase the programmed time in 0.5 hour increments until the desired time is achieved to a maximum of 7.5 hours. The LED indicator panel will display the current programmed time with a combination of illuminated LEDs.
- Page 11 Operating Instructions (cont.) 0.5 hrs 0.5 hrs Continue at low speed To use the remote control to select a breeze mode, follow the above directions and use the corresponding buttons on the remote control. The Sleep mode can operate in conjunction with a timer to allow the Fan to automatically switch off after a programmed period of time.
-
Page 12: Other Useful Information
Other Useful Information Cleaning and Maintenance Always switch off and unplug the Fan from the power outlet before moving or cleaning. To clean the exterior of the Fan, wipe over the surface with a soft, damp cloth and dry thoroughly. Do not use detergents or abrasive cleaners. To clean the front or rear grille and the motor air vents, use a vacuum cleaner to remove light dust. -
Page 13: Warranty Information
Warranty Information Congratulations on your purchase This Prinetti Oscillating Tower Fan with Remote Control is warranted to be free from ® defects in material and workmanship under normal use and service conditions for a period of 12 months from the date of purchase of this article. Evidence of unfair usage or incorrect adjustment by the owner will void this promise. - Page 14 9:00am – 3:00pm (AEST) Saturday This product is warranted and imported by: Uncle Bill’s (Australia) Pty Ltd 48B Egerton Street Silverwater NSW 2128, Australia Phone: 02 8799 3500 Item: IA5007A 14 AFTER SALES SUPPORT AU 1300 777 137 NZ 0800 824 556 service@unclebills.com.au...
- Page 15 Notes AFTER SALES SUPPORT AU 1300 777 137 NZ 0800 824 556 service@unclebills.com.au...