Citizen PPU PPU-700 User Manual page 8

Please observe the following precautions for power source and power
cord:
G Do not plug or unplug the power cord with a wet hand.
G Use the printer only at the specified supply voltage and frequency.
G Use only the specified AC adapter with the printer.
G Check to make sure that the supply outlet from which the printer is
powered has a sufficient capacity.
G Do not supply the printer from a power strip or current tap shared
with other appliances.
G Do not plug the power cord into a supply outlet with dust or debris
left on its plug.
G Do not use a deformed or damaged power cord.
• Neglecting to handle properly may result in printer failure, emission
of smoke, fire, or electric shock.
• An overload may cause the power cord to overheat or fire or the
circuit breaker to trip.
G Do not use the printer while the power cord is loaded with anything
or it is trampled on.
G Do not use or carry the printer with its power cord bent, twisted, or
pulled.
G Do not attempt to modify the power cord unnecessarily.
G Do not lay the power cord in the neighbor of a heating device.
• Neglecting these cautions may cause wires or insulation to break,
which could result in leakage, electric shock, or printer failure. If a
power cord sustains damage contact your CITIZEN SYSTEMS dealer.
G Do not leave things around the supply outlet.
G Supply power to the printer form a convenient wall outlet, readily
accessible in an emergency.
• The printer may not be immediately shut down in an emergency.
G Insert the power plug fully into the supply outlet.
G If the printer is likely to be out of use for a long time, leave it
disconnected from its supply outlet.
WARNING
— 4 —