Paper Near-End Sensor (When Phu-3*** Is Used) - Citizen PPU PPU-700 User Manual

4.13 Paper Near-End Sensor (When PHU-3*** is used)

1. When the print paper remainder becomes low, the Paper Near-End (PNE)
sensor sends a signal to the computer telling the paper is low and stops
printing. This function is enabled or disabled by the memory switch. For
memory switch setting, refer to "7.2 Memory Switch Functions (MSW2-8)".
2. The PNE sensor can be adjusted in the following range by loosening the top
screw.
3. Set a new paper roll in accordance with "4.5 Setting/Replacing Paper Roll".
Type
PHU-3*1*
PHU-3*2*
Note: For PHU-3*2*, the space between the 1st PNE sensor and the 2nd PNE sensor
shall be fixed at 5 mm.
Number of Adjustable Range (Outer Diameter of Rolled Paper)
PNE Sensors
1st PNE Sensor
1
2
PHU-3*1*
PHU-3*2*
— 36 —
φ23.6 to φ50
φ23.6 to φ40
2nd PNE Sensor
—
φ33.6 to φ50
1st PNE sensor
1st PNE sensor
2nd PNE sensor