ProMOTION EV1 User Manual page 9

ProMOTION EV1
USING YOUR PROMOTION EV1 DEVICE
2
Connect the charger to the battery charging port, then connect the
charger to a mains power supply and turn the supply on.
3
The battery level indicator will light up and sequentially pulse to indicate
that charging is in progress. The percentage of charge is indicated by how
many LEDs pulse.
• 1 LED = 25% charge
• 2 LED = 50% charge
• 3 LED = 75% charge
• 4 LED = 100% charge
• Charging is complete when the battery level indicator turns off
4
Unplug the charging cable* from the battery charging port once the
battery is charged.
Precautions
Only use supplied charging cable
The battery should never be covered during the charging cycle.
It is recommended that battery charging is ceased once the battery has
reached a fully charged state.
P16
User Manual ProMOTION EV1
USING YOUR PROMOTION EV1 DEVICE
Battery Installation
1
Orientate the battery with the Therapy Unit. A slot on the battery will
line up with the corresponding feature inside the Therapy Unit.
2
Push the battery into the Therapy Unit until the battery eject tab clicks,
securing the battery in place.
Precautions
correctly orientated and nothing is obstructing the battery slot.
Do not force the battery into the Therapy Unit. Check the battery is
P17
User Manual
Alignment slot