ProMOTION EV1 User Manual page 11

ProMOTION EV1
USING YOUR PROMOTION EV1 DEVICE
Installing Pump Unit
3
Continue to rotate the Pump Unit, until it is inline with the Therapy Unit.
4
Push the Pump unit cable and clip into the USB port on the Therapy Unit until
it clicks into place.
Precautions
Check that the Pump Unit fits the bayonet port correctly before use.
The Pump Unit should be 'parallel' with both the Therapy Unit and the cradle.
P20
User Manual ProMOTION EV1
USING YOUR PROMOTION EV1 DEVICE
Fitting Compression wrap
1
Carefully locate the assembly by placing the Therapy Unit over
the injury site.
2
Wrap the Compression wrap comfortably around the limb - It should be
secure enough not to slip, but not tight.
3
Locate the wrap handle into the adjustment array, securing the wrap
assembly in place.
Precautions
will secure itself when inflated.
Do not over tighten the Compression wrap around the limb. The wrap
P21
User Manual