Related Manuals for Otto Bock Myoelectric Upper Arm Prosthesis with DynamicArm
Summary of Contents for Otto Bock Myoelectric Upper Arm Prosthesis with DynamicArm
- Page 1 Myoelectric Upper Arm Prosthesis with DynamicArm - Custom-made device - Instructions for use...
-
Page 3: Table Of Contents
Table of contents Foreword ......................... Description of the Design and Individual Components ..........Areas of Application and Usage Restrictions ............. Medical and Therapeutic Aspects ................Safety ..........................Explanation of warning symbols ................General safety instructions ..................Handling .......................... Check ......................... Donning ...................... -
Page 4: Foreword
1 Foreword INFORMATION Date of last update: 2021-04-28 Please read this document carefully before using the product and observe the safety ► notices. Obtain instruction from the qualified personnel in the safe use of the product. ► Please contact the qualified personnel if you have questions about the product or in case of ►... -
Page 5: Areas Of Application And Usage Restrictions
3 Areas of Application and Usage Restrictions Your prosthesis serves as a functional and cosmetic replacement for the amputated limb and enables you to grasp, hold, and carry objects. The use of your prosthesis and the performance you will be able to achieve depends on your indi vidual diagnosis, the residual limb conditions and your mobility grade. -
Page 6: Handling
► Do not use the product if it is damaged or in a questionable condition. Take suitable meas ures (e.g. cleaning, repair, replacement, inspection by the manufacturer or a specialist work shop). ► Use the product carefully and as intended. ► Do not make any changes to the product. 6 Handling 6.1 Check CAUTION... -
Page 7: Wearing Of The Prosthesis
3) Pull the soft tissue into the prosthetic socket little by little until the pull-in sock can be removed. 4) Optional: Apply the harness with linear control element. Put the sound arm through the harness loop. Pull the harness loop behind the back to the opposite shoulder. -
Page 8: Charging The Prosthesis
Prosthesis without Liner: 1) Take off the harness. 2) Pull the skin in the armpit area slightly out of the prosthetic socket. 3) Slide off the prosthesis. Prosthesis with Liner: 1) Take off the harness. 2) Release the connection between the liner and prosthesis; then remove the prosthetic socket. 3) Roll the liner off your residual limb. -
Page 9: Maintenance
and the skin on your residual limb with water and skin-friendly soap. Dry the cleaned areas thor oughly. Do not place the liner on a radiator or other heat source. Ensure that no soap residue remains on the liner since this could cause skin irritation on your residual limb. Harness Wash the harness separately at a maximum of 30 °C.
Need help?
Do you have a question about the Myoelectric Upper Arm Prosthesis with DynamicArm and is the answer not in the manual?
Questions and answers