Safety; Explanation Of Warning Symbols; General Safety Instructions - Otto Bock Hip Disarticulation Prosthesis Instructions For Use Manual

Please discuss all measures for maintaining and improving residual limb functionality as well as
the treatment and hygiene of the disarticulation region with your doctor. Depending on your spe­
cific indications, complications can occur in individual cases. This may restrict your ability to wear
the prosthesis.
Treatment and Hygiene of the Disarticulation Region
Caring for the skin in the disarticulation region on a daily basis is very important. Washing the dis­
articulation region daily with skin-friendly soap can prevent skin problems. Use special care
products such as Derma Prevent, Derma Repair and Derma Clean.
Volume Fluctuations
As a prosthesis wearer, you should pay special attention to your weight since any fluctuations will
have a direct impact on the fit of your prosthesis. Minor volume fluctuations over the course of the
day are normal.
If you have additional questions regarding volume fluctuations, please consult your doctor or
prosthetist.

5 Safety

5.1 Explanation of warning symbols

Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE

5.2 General safety instructions

CAUTION!
Risk of injury and risk of product damage
► To avoid the risk of pinching, do not reach into the joint mechanism.
► Keep the product away from open flames, embers and other sources of heat.
NOTICE!
Risk of product damage and limited functionality
► Do not expose the product to prohibited environmental conditions (see instructions for use of
the individual components).
► Check the product for damage if it has been exposed to prohibited environmental conditions.
► Do not use the product if it is damaged or in a questionable condition. Take suitable meas­
ures (e.g. cleaning, repair, replacement, inspection by the manufacturer or a specialist work­
shop).
► Use the product carefully and as intended.
► Do not make any changes to the product.
► Check the product for damage and readiness for use prior to each use.
► Do not use the product if its functionality is restricted. Take suitable measures (e.g. cleaning,
repair, replacement, inspection by the manufacturer or a specialist workshop).
5