Slope Flail Mowers BCRL & BCRM
How to install Safety Signs:
Be sure that the installation area is clean and dry.
•
Decide on the exact position before you remove the backing paper.
•
Remove the smallest portion of the split backing paper.
•
Align the decal over the specified area and carefully press the small portion with the exposed sticky back-
•
ing in place.
Slowly peel back the remaining paper and carefully smooth the remaining portion of the decal in place.
•
Small air pockets can be pierced with a pin and smoothed out using the piece of decal backing paper.
•
Important Safety Information
8