Operating Instructions - Tar River BCRL Operator's Manual

Slope Flail Mowers BCRL & BCRM
Check oil level in the center gearbox.
•
Check oil level in the drive tube.
•
Check belt tension.
•
Check rotor bearings on both sides.
•
Check the PTO length (See PTO section).
•
The cutting height of the equipment depends on the position of the rear roller. Both sides are
set at the same height.
To adjust the cutting height on the flail mowers, loosen the pivot bolt (do not remove) and re-
position the bolts holding the roller to the desired height.

Operating Instructions

Pivot pin locking position
Cutting height adjustment
15