Vigitron MaxiiNet Vi30018 Operational Manual page 89

Field
Member
State
Type
Operation Key
Time out
Activity
Description
There are three configurable trunk groups.
"--" means the trunk has not been built on the
corresponding port. "A" means trunk has been built
on the corresponding port.
Administrator can enable/disable the function of this
trunk.
Static: Static setting by manual.
LACP: Setting by ACP.
Assign an operation key for this device
Short Time Out: Re-configure LACP trunk every 1
second.
Long Time Out: Re-configure LACP trunk every 30
second.
You should set at least one side of each trunk to
"Active" state. If both sides of a trunk are all set to
"Passive", LACP trunk will never be built up.
Page | 89