Page 1
Screw M6 X 30 Washer M6 SRC Design uses Metric System of Measu reme nt and all dimensions in Millimeters * Recommended to use the T orque specified in the table **Deno tes Usage of Liquid Thread Locker in specified Locations...
Page 2
MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2...
Page 3
Top surface of the Mounting Hole and the bottom side of the Top Rack. The final mounted condition of the Top Rack is as shown in the drawing on the right. Copyright By SRC Design and Specification are subjected to change Page 3...
Page 4
50 kilo meters of ride and at regular intervals. 7. We are showing here the Scope of Supply/ Installation/Parts list & BOM from SRC 8. To the maximum extent possible, our design use the current Mounting/Fitment of the...