Programming Radio Key - SoundCraft Secura Key Radio Key RK-65K Operating Manual

®
Radio Key RK-65K Operating Guide
®

PROGRAMMING RADIO KEY

100M
®
Radio Key Transponders (Key Tags and Cards) are pre-en-
coded and engraved at the factory with unique Transponder ID
numbers. Because these numbers are unique, Facility Codes
(Site Codes) are not required.
Transponder ID Numbers are not pre-programmed into the Radio
®
Key 100M; you must add them to the system as described below.
®
Radio Key 100M allows you to assign a Transponder to each
User ID Number (1 - 100) for programming purposes. The
User ID Number is associated with the individual person using
the transponder.
Be sure to record the User ID Number, the Transponder
ID Number and the user's name, and keep this informa-
tion in a secure place. A blank User Log Form has been
included for this purpose. Do not write on this form; use it as
a photocopy master.
Because a new Transponder ID Number can be assigned to
any available User ID Number, the reader always has capac-
ity to store 100 Transponders, even after many Transponders
have been voided from the reader.
Secura Key 5