Converting To Rk100M Mode - SoundCraft Secura Key Radio Key RK-65K Operating Manual

®
Radio Key RK-65K

CONVERTING TO RK100M MODE

The RK100M has been replaced by the new RK-65K. The
RK100M was designed to read randomly numbered cards and
tags without facility codes (RKCM-01, RKKT-01). The RK100M
unit is only able to enroll up to 100 users. If you need to replace
an existing RK100M, or if you want a reader that uses random
cards and tags, you may convert this product to the RK100M
mode, as shown below.
In the RK100M mode, some programming steps differ from the
RK-65K. The following section also describes those different
program steps.
Converting between RK-65K and RK100M modes:
Place the unit in the Program Mode (see Page 8). Press MODE,
followed by "5" (for RK65K mode) or "6" (for RK100M mode).
Press ENTER. (RK-65K mode is the default.)
+
(Mode Number 5)
(MODE)
+
(MODE) (Mode Number 6)
5 +
(ENTER)
6 +
(ENTER)
Secura Key
Operating Guide
(For RK65K mode)
(For RK100M mode)
21