Table of Contents
Advertisement
®
Radio Key
RK-65K
Operating Guide
You can also place a reader in this mode by entering the
Program Mode (see page 8) then pressing Mode followed by
"9" followed by Enter.
+
9
+
(MODE)
(ENTER)
(Mode Number 9)
While the LED is fl ashing Red/Green present one User
Card for each Facility Code being used to the reader, one
at a time. After you are fi nished, allow the reader to time
out and return to the Normal Mode before proceeding.
NOTE: An invalid facility code will beep with no LED visible.
ADDING AND DELETING USERS (RK65K)
Add A Transponder (Key Tag or Card) To The System:
Place the unit in the Program Mode (See Page 8). Press Add,
followed by the sequence of digits representing the Transponder
ID number. Then press Enter. For example, to add transponder
#12 to the reader the following sequence would be followed:
+
1
+
2
+
(ADD)
(User ID Number 12)
(ENTER)
Transponder number 12 is now valid.
Secura Key
10
Advertisement
Table of Contents
