®
Radio Key
RK-65K
Add A Series Of Transponders To The System (RK65K):
Place the unit into the Program mode (see Page 8). Press Add,
followed by the sequence of digits representing the lowest
transponder ID number. Then press Thru, followed by the
sequence of digits representing the highest transponder ID
number. Then press Enter. For example, to add transponders
#1 through #10 to the system:
+
1
(Starting
(ADD)
User No. 1)
Transponder number 1 through 10 are now valid.
Delete A Transponder From The System (RK65K):
Place the unit in the Program Mode (see Page 8). Press Void,
followed by the sequence of digits representing the transponder
ID number. Then press Enter. For example, to delete transponder
#12, the following sequence would be presented:
+
1
(VOID)
(User ID Number 12)
Transponder #12 is now void.
+
+
1
(Ending User ID
(THRU)
+
2
+
(ENTER)
Secura Key
+
0
+
Number 10)
11
Operating Guide
(ENTER)