Table of Contents
Advertisement
®
Radio Key
RK-65K
To set the Operating Mode, put the unit into the Program mode,
(See Page 8). Press MODE, then press either "1" , "2", "3", or "4".
Press ENTER. The Access Control Unit will exit Programming
Mode and enter the selected Mode. For example, to set the
unit to the inactive (locked) mode, the following sequence
would be followed;
+
(MODE)
(Mode Number 2)
To Exit Programming Mode Immediately (RK65K/RK100M):
Press MODE, then "1" (or 2, 3, or 4) card to the unit. Press
ENTER. This returns the unit to the selected mode immediately,
bypassing the 15 second timeout.
+
(Mode Number 1)
(MODE)
Timed Antipassback(RK65K)
Timed antipassback is used to discourage card sharing. After
one successful card use, the unit will treat that card as Void
for a preset number of minutes. When timed antipassback is
enabled, it will apply to all valid cards.
2
+
(ENTER)
1
+
(ENTER)
Secura Key
Operating Guide
15
Advertisement
Table of Contents
