Scan Operation; I Scan Types - Icom IC-T90A Instruction Manual

6

SCAN OPERATION

I Scan types

D VFO scans
FULL SCAN (p. 46)
Lower
edge
Scan
P SKIP
Jump
BAND SCAN (p. 46)
Lower
band edge
Scan
Start
Jump
PROGRAMMED SCAN (p. 46)
Lower
scan edge
(0A–24A)
Jump Scan
Jump
45
Repeatedly scans all fre-
Upper
edge quencies over the entire re-
ceive range.
P SKIP
• Some frequency ranges
are restricted depending on
versions.
Repeatedly scans all fre-
Upper
band edge quencies over the entire se-
lected band.
Repeatedly scans between
Upper
two user-programmed fre-
scan edge
(0B–24B)
quencies. Used for checking
for frequencies within a
specified range such as re-
peater output frequencies,
etc.
Up to 25 programmed scan ranges (0A/0B to 24A/24B), full
memory scan, select band scan and memory bank scan pro-
vide scanning versatility. Each scan can have skip channels
programmed.
D Memory scans
FULL MEMORY SCAN (p. 48)
CH-001 CH-002 CH-003
SKIP
CH-000
CH-499 CH-006 CH-005
SELECT BAND SCAN (p. 48)
78.500 80.200 81.250
SKIP
77.500
101.200 96.500 90.150
BANK SCAN (p. 48)
CH-A01 CH-A03 CH-A04
SKIP
CH-A00
CH-A13
CH-A99 CH-A35
Repeatedly scans all mem-
ory channels except skip
channels.
CH-004
Repeatedly scans memory
channels except skip chan-
nels within a selected mem-
85.100
ory band. (e.g. WFM, 144
MHz or 440 MHz memory
band, etc.)
(Unit: MHz)
Repeatedly scans memory
channels except skip chan-
nels within a specified mem-
CH-A12
ory bank (i.e. memory Bank,
A00–A99).