Programmable Function Keys - Icom IC-F1020 Instruction Manual

VOLUME CONTROL
Adjusts the audio output level.
• Minimum audio level (when setting control at maximum
counterclockwise) is pre-programmed.
POWER SWITCH
Turns the power ON and OFF.
• The following functions are available at power ON as op-
tions:
• Automatic scan start
• Password prompt
MICROPHONE CONNECTOR
Connects the supplied microphone or optional DTMF micro-
phone for SmarTrunk II™ operation here.
NEVER connect other microphones. The pin assignments
may be different and the transceiver may be damaged.
MICROPHONE
The supplied microphone has a PTT switch and a hanger
hook.
• The following functions are available when the microphone is
hung on or released form the microphone hanger:
• Automatic scan start when hung.
• Automatic priority channel selection when released.
• Turns OFF and ON the monitor function when hung or released
respectively.
PANEL DESCRIPTION

Programmable function keys

The following functions can be assigned to programmable
function keys. Assigned function names can be affixed to the
LCD using supplied stickers.
CHANNEL UP AND DOWN KEYS
• Select an operating channel
CH UP
• Select a bank after pushing the [
CH DN • Select a DTMF channel after pushing the [
key.
• Select a scan group after pushing and holding the
[ ] key.
SCAN
BANK UP AND DOWN KEYS
Select a bank (a group of 16 (or multiples of) chan-
BK UP
nels).
• This function may be available for the optional 160 chan-
BK DN
nel type only.
• When the optional UT-105 is installed, push one or more
times to select a channel bank for conventional channels
or SmarTrunk II™ channels.
1
] key.
BANK S
]
DTMF
2