Scan Operation; I Scan Types; I Com Band Scan; I Memory Scan - Icom IC-A24 Instruction Manual

I Scan types

The U.S.A. version has 3 scan types to suit your needs. The
non-U.S.A. versions have 2 scan types.
COM BAND SCAN
108.00 118.00
MHz MHz
Scan
Jump
MEMORY SCAN
non-TAG channel
Mch 2 Mch 4 Mch 6
Mch 1 Mch 7
non-TAG
channel
Mch 19 Mch 10 Mch 8
WEATHER CHANNEL SCAN
Repeatedly scans all "TAG" weather channels. Weather
channels are available for the U.S.A. version only.
Repeatedly scans
136.975
all frequencies
MHz
over the entire
COM band.
Repeatedly scans all
"TAG" memory chan-
nels. Used for checking
often-used channels
and bypassing usually
busy channels such as
control-tower frequen-
cies.

SCAN OPERATION

I COM band scan

q Push [CLR•DEL] to select the frequency mode.
w Push [SQL•
] to set the squelch level to the point
WX-ALERT
where noise is just muted.
e Push
, then push [ANL•
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, rotate [DIAL].
r To stop the scan, push [CLR•

I Memory scan

q Push [MR•
] to select memory mode.
MW
w Push [SQL•
] to set the squelch level to the point
WX-ALERT
where noise is just muted.
e Push
, then push [ANL•
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, rotate [DIAL].
r To stop the scan, push [CLR•
5
] to start the scan.
SCAN
].
DEL
] to start the scan.
SCAN
].
DEL
4
5
16