Advertisement

Quick Links

CENTURY MAX_T5200_V1.0
C
e
n
t
u
r
y
T
C
e
n
t
u
r
y
T
B
a
r
i
a
t
r
i
c
B
a
r
i
a
t
r
i
c
H
o
m
e
c
a
r
H
o
m
e
c
a
r
O
p
e
r
a
t
i
o
n
O
p
e
r
a
t
i
o
n
5
2
0
0
5
2
0
0
M
a
x
M
a
x
e
B
e
d
e
B
e
d
M
a
n
u
a
l
M
a
n
u
a
l

Advertisement

Table of Contents
loading

Summary of Contents for Tuffcare Century Max T5248

  • Page 1 CENTURY MAX_T5200_V1.0...
  • Page 2: Table Of Contents

    Main Components Product Specifications Assembly Head & Footframe 8 - 9 Congratulations on your purchase of a TUFFCARE Century Mattress End Stops 9 - 10 Bariatric Max bed. Our bariatric bed is a true heavy duty bed that Head & Footboard 11 - 12 holds up to 1,000 lbs.
  • Page 3: Safety Precautions

    Follow the Safety Warnings and Operating Instructions in the service/User’s manual. • Be sure that bed side rails are properly attached on main frame before Contact your dealer or visit WWW.TUFFCARE.COM. the patient is moved into the bed. 2. CRUSH HAZARD DUE TO LOW BED CLEARANCE •...
  • Page 4: Unpacking

    UNPACKING PRODUCT SPECIFICATION UNPACKING PRODUCT SPECIFICATION Remove the bed from packing case or pallet and examine deck and frame for shipping damage. If damage is detected in shipping, contact the freight company and file a damage claim. Dispose of the removed packaging at your local recycling center. Discard the wrapper and box separately.
  • Page 5: Assembly

    WARNING (Below illustration shows headframe on the right and footframe on Use only Tuffcare parts to complete this bed assembly. the left) Parts: see parts list under "Main Component" on following page in this manual.
  • Page 6 2b. Remove the top 2 sets of nuts and bolts on each end of the headframe on the receptacle holders, set the nut and bolts on the side. 1c. Tighten the nuts and bolts on each end with a pair of 13mm wenchs to secure the head and foot frames.
  • Page 7 3a. First, start with the foot frame, pull out the ring grip quick- 3d. Repeat the same process as the footboard for the headboard release pins on two side of the receptacle tubes. to complete the assembly. 3b. Carefully set the mounting tubes on the board end, down the receptacle tubes.
  • Page 8: Half Bed Side Rails

    4a. The actuator plug are color coded, plug the blue plug into the foot motor receptacles and the yellow into the hi/lo receptacles. 4c. Make sure the side with the black release lever faces the foot ASSEMBLING SWING-DOWN HALF BED SIDE RAILS end of the bed.
  • Page 9: Operation

    OPERATION OPERATION RAISING/LOWERING THE BED PREPARING THE BED FOR USE WARNING DO NOT exceed the maximum weight limit of Beds: T5248 – 800 lbs, T5254 & T5260 – 1,000 lbs. 1. Make sure all of electronic components are well connected, and all of wires are clear from moving parts.
  • Page 10: Junction Box Functions

    Note: There is only one D. Hi-Low Motor (installed on Foot Main Frame) upper locking position for E. Hi-Low Motor (installed on Head Main Frame) Tuffcare bed side rails. F. LED Night Light G. Battery Indicator Light (green when charged) H. Fuse Box I.
  • Page 11: Maintenance

    (1) year. The warranty period commences on the original manufacture ® date. If within such warranty period any such product proven to Tuffcare DETECTING WEAR AND DAMAGE satisfaction to be defective, such product will be repaired or replaced at ®...

This manual is also suitable for:

Century max t5254Century max t5260Century max t5200

Table of Contents