8.
POWER CONNECTOR
This connector is to supply the power from the special AC adapter(27AD).
Connector Schematic
1
Jack used
Applicable plug : JXP series type A (I.D.: 2.45 mm, O.D.: 5.5 mm) (HOSHIDEN) or its equivalent
CAUTION:
1) Be sure to use the specified AC adapter. Use of any other power source could cause trouble to or break the
printer.
2) Do not connect the power source with different polarity.
3) After using the printer or when not using it for a long period of time, be sure to unplug the AC
adapter from a plug socket for your safety.
No.
1
2
: HEC0470-01-640 (HOSHIDEN) or its equivalent
Function
Inner terminal
7.2V
Outer terminal
GND
2
CBM-270 User's Manual
: Minus pole (GND)
: Plus pole