Troubleshooting - Fisher & Paykel DCS RF24-D Use And Care And Installation Manual

TROUBLESHOOTING

PROBLEM
Odor in cabinet
Noisy operation
Cabinet vibrates
Cabinet light not working
Appliance will not run
Appliance runs too long
Moisture collects inside
Moisture collects on outside surface
Interior too hot/too cold
Fault System activated
POSSIBLE CAUSE/SOLUTIONS
Interior needs cleaning
Cabinet not level
Fan blade damaged/ call for service
Cabinet not level
Fan blade damaged/ call for service
Call for service
Temperature control turned to "OFF"
Line cord not plugged in
No power at electrical outlet
House fuse blown
Prolonged door openings
Control set too cold
Condenser needs cleaning
Too many door openings
Prolonged door openings
Hot, humid weather increases condensation
Control improperly set
Hot, humid weather increases condensation. As humidity
decreases, moisture will disappear.
Control improperly set
Control improperly set
Faulty thermometer
Condenser needs cleaning
Air leaking into unit
See "Warning Alarms" on page 9
See "Fault 'Basic' Function Quick Reference" sheet
Temperature alarm may occur after user selected temperature
set-point changes in excess of 10 º F or during heavy usage
conditions. This is normal and not a fault of the appliance. The
Fault System is monitoring the duration of large swings in
temperature to protect your contents, and may alert you to this
event. See "Reset Alarms" section on page 10.
14