Table of Contents
Advertisement
If there is a problem with your appliance, please check the following points before contacting your
local DCS Authorized Service Agency or DCS Customer Care Representative.
Problem
Freezer control and
lights are on, but
compressor is not
operating.
Temperature-
controlled drawers
are too warm.
Refrigerator does
not operate.
Food temperature
is too cold.
All manuals and user guides at all-guides.com
Possible causes
Refrigerator is in defrost
mode.
Control settings are not
right.
Freezer controls are not
right.
Drawer is improperly
positioned.
Refrigerator is not plugged
in.
Touch temperature
controls are set to off.
Fuse is blown, or circuit
breaker needs to be reset.
Power outage has
occurred.
Refrigerator is
malfunctioning.
Condenser coils are dirty.
Refrigerator or freezer
controls are set too cold.
Food is too close to upper
left air inlet.
Troubleshooting
What to do
Normal operation.
Wait 40 minutes to see if refrigerator restarts.
See page 11 to adjust controls.
See page 11 to adjust controls.
See pages 12 – 14 to verify drawer
positioning.
Plug in refrigerator.
See page 11 to adjust controls.
Replace any blown fuses.
Check circuit breaker and reset, if necessary.
Call local power company listing to report
outage.
Unplug refrigerator and transfer food to
another refrigerator. If another refrigerator is
not available, place dry ice in freezer section
to preserve food. Warranty does not cover
food loss. Contact service agent (see page 36).
Clean according to the chart on page 23.
See page 11 to adjust controls.
Relocate food away from upper left corner.
US
29
CA
Advertisement
Table of Contents
