Replacing The Battery - IBM ThinkPad A22e Supplementary Manual

Replacing the battery

Replacing the battery

To replace the battery, do as follows:
1. Turn off the computer, or enter hibernation mode. Then disconnect the ac
adapter and all cables from the computer.
Note: If you are using a PC Card, the computer may not be able to enter
2. Close the computer display, and turn the computer over.
3. Slide the battery latch to unlock it 1 ; then remove the battery 2 .
4. Align the front of the spare battery with the front side of the battery
compartment in the computer 1 ; then gently push the battery into the
compartment 2 .
5. Slide the battery latch to the locked position.
6. Turn the computer over again. Connect the ac adapter and the cables to
the computer.
34
®
ThinkPad A22 Service and Troubleshooting Guide
hibernation mode. If this happens, turn off the computer.
2
1
1
2