Geo GeoDist 80 User Manual page 43

EN
E
SAFETY NOTES
INTENDED USE OF INSTRUMENT
The instrument emits a visible laser beam in order to carry out the following
measuring tasks (depending on the instrument): distance measurements.
SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
Measurements through glass or plastic windows; dirty laser emitting
windows; after the instrument has been dropped or hit. Please check the
accuracy.
Large fluctuation of temperature: If the instrument will be used in cold
areas after it has been stored in warm areas (or the other way round) please
wait some minutes before carrying out measurements.
CARE AND CLEANING
Handle measuring instruments with care. Clean with soft cloth only after
any use. If necessary damp the cloth with some water. If the instrument is
wet clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in
original container / case only.
ELECTROMAGNETIC ACCEPTABILITY (EMC)
It cannot be completely excluded that this instrument will disturb other in-
struments (e.g. navigation systems); will be disturbed by other instruments
(e.g. intensive electromagnetic radiation nearby industrial facilities or radio
transmitters).
CE-Conformity
The instrument has the CE mark according to EN 61326-1:2013, 61326-2-
2:2013, 300 328 v2.1.1:2016, 62479:2010, 61010-1:2010.
43