STAKE OUT FUNCTION
Press
Select
and confirm with
= move the cursor
= set the required distance
= start the stake out function
The red arrow shows in which direction the unit must be moved to reach
the distance required. When approaching the target an accoustic signal
will sound.
OFFSET FUNCTION
Press
Select
and confirm with
= move the cursor
= set the required offset
and confirm with
The activation of the offset function will be displayed permanently
by this symbol
ATTENTION: The offset function is permanently active, even
after powering off/on of the unit. This function must be
de-activated after finishing the measuring task.
.
EN
39