Eizo FlexScan EV2480-BK User Manual page 27

Function Setting Value
USB On
Off
On-Screen Logo On
Off
Key Lock Off
Menu
All
You can switch between enabling and disabling of the USB port of
the monitor.
• "On"
Enables the USB port. If you are using the following functions,
set this function to "On".
- Display of video signals using USB-C
- USB Hub Function
- USB Power Delivery
- Screen InStyle (monitor control)
• "Off"
Disables the USB port so that USB peripheral devices cannot
be used.
Note
• By pressing the switch on the far left for three seconds or more
in the state where the power is turned on and the menu is not
displayed, you can change the setting from "Off" to "On". The
same operation cannot be used to change from "On" to "Off".
When the monitor is turned on, the EIZO logo appears on the
screen.
When this function is set to "Off", the EIZO logo does not appear.
In order to prevent changes to settings, the operation switches on
the front of the monitor can be locked.
• "Off" (default setting)
Enables all switches.
• "Menu"
Locks the switch.
• "All"
Locks all switches except the power switch.
Description
Chapter 4 Administrator Settings
27