Table of Contents
Advertisement
3
Lifting instructions PT250 pump unit
DANGER
Never walk under a raised load. This can result in a life-threatening situation.
WARNING
Always disconnect all external connections before moving the pump unit.
WARNING
Neither the lifting eye on the engine nor the lifting eye of the (bare shaft) pump may
be used for transport of the pump unit.
WARNING
Lifting forces must be as vertical as possible; the maximum lifting angle is 15°.
Pump unit in enclosure
There is a lifting eye located on the top of the enclosure. Only lift the unit from this lifting eye.
WARNING
If the pump unit is installed on a swampy or muddy surface, the installation
may be 'stuck' to the ground.
DANGER
NEVER move or lift the pump unit by the angle profiles on top of the enclosure or
stacking frame.
8
Advertisement
Table of Contents
