Fisher & Paykel RB2470BRV1 Installation Manual page 27

Installing the hanging and attachment brackets
Lay the bottom custom door panel
6
(face down) onto the floor and place
the top hanging bracket on the door
panel. Latch the rulers on top of the
door panel (C).
Align the center line of the top hanging
7
bracket with the center of the top door panel.
8 Once aligned, fix the top hanging bracket to
the bottom door panel with wood screws.
Remove the rulers from the top hanging
9
bracket and discard.
@0 INSTALL BOTTOM DOOR PANEL (CUSTOM)
C
Hanging the door panel
Open the freezer door.
!0
Hang the bottom door panel onto the
!1
height adjustment nuts (D) at the top
of the freezer door.
!2 Align the bottom attachment
brackets (E) with the screw
holes at the bottom of the
bottom door panel. Fasten with
cabinetry attachment screws (F)
and wood screws (G).
– Do not tighten fully to
allow adjustment of the
bottom door panel.
Bottom view of door
D
E
G
F
25