Fisher & Paykel OR36SDI6 Installation Manual page 8

Freestanding induction cooker
Hide thumbs Also See for OR36SDI6:
Table of Contents

Advertisement

Available languages

Available languages

Island trim and backguard
It is mandatory to install and use the range with
z z
either the island trim or the optional backguard
correctly in place.
The island trim is already fitted to the range while
z z
the backguard can be purchased as a separate kit.
If replacing the island trim with the backguard,
z z
assemble it by using the same screws/spacers
used for fixing the island trim.
Grounded outlet
The electric cord with 4-prong ground plug
(NEMA 14-50P) shall have a minimum length
of 48" (1220mm) beyond the back of the range.
SUPPLY AREA DIMENSIONS
A Distance from either edge of Range to supply area
B Height of electrical supply area (from floor)
C Width of electrical supply areas
D Depth of supply area (ie maximum protrusion of electrical connection from wall)
8
FITTING THE OPTIONAL BACKGUARD
LOCATION OF ELECTRICAL SUPPLY
Left side
Final position of cooker against wall
of cavity
Electricity
Floor
A
C
B
A
INCHES
MM
1/4
6
8 1/8 – 10 1/8
207 – 257
35 3/8
899
4 1/2
115
A
D

Advertisement

Table of Contents
loading

This manual is also suitable for:

Or36sdi9 seriesOr36sdi6x1

Table of Contents