Table of Contents
Advertisement
Available languages
Available languages
Fitting the adjustable feet
The adjustable feet must be fitted to the base of the range before use.
Rest the rear of the range on a piece of the polystyrene packaging exposing
the base for the fitting of the feet.
IMPORTANT
Take care not to damage the range during this operation.
Fit the four legs by screwing them tight into the support base as shown.
Levelling the range
The range may be levelled by screwing
z z
the lower ends of the feet IN or OUT.
Small adjustments may be made to the
z z
range in the upright position, however
it may be necessary to tip the range
again to make larger adjustments.
10
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
FITTING THE ADJUSTABLE FEET
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
Fitting the adjustable (front) feet covers (optional)
If using the adjustable feet covers fit these while the range is tipped over.
Tip range onto its back and fix
1
brackets to mounting holes.
Tip range onto its back and fix
1
brackets to mounting holes.
1
Tip range onto its back and fix
1
brackets to mounting holes.
1 Tip range onto its back and fix
Tip range onto its back and fix
1
Tip range onto its back and fix
1
brackets to mounting holes.
brackets to mounting holes.
brackets to mounting holes.
Slot the outer panels over the
3
tensioned inner panels.
Slot the outer panels over the
3
tensioned inner panels.
3 Slot the outer panels over the
3
Slot the outer panels over the
3
tensioned inner panels.
tensioned inner panels.
Slot the outer panels over the
3
Slot the outer panels over the
3
tensioned inner panels.
tensioned inner panels.
5 Stand range back upright.
Stand range back upright.
5
Stand range back upright.
5
5
Stand range back upright.
5
Stand range back upright.
5
2
Tip range onto its back and fix
Gently bend the sides of the inner
2
brackets to mounting holes.
panels outwards to tension.
2 Gently bend the sides of the inner
2
Gently bend the sides of the inner
2
panels outwards to tension.
4
Slot the outer panels over the
4 Secure covers to brackets using the
Secure covers to brackets using
4
tensioned inner panels.
the provided screws
4
Secure covers to brackets using
4
the provided screws
6 Adjust the inner panels of the foot
6
Stand range back upright.
Adjust the inner panels of the foot
6
covers to suit height of range feet.
6
Adjust the inner panels of the foot
6
Gently bend the sides of the inner
panels outwards to tension.
Gently bend the sides of the inner
2
panels outwards to tension.
Gently bend the sides of the inner
2
panels outwards to tension.
Gently bend the sides of the inner
panels outwards to tension.
panels outwards to tension.
Secure covers to brackets using
the provided screws
Secure covers to brackets using
4
the provided screws
Secure covers to brackets using
4
provided screws.
the provided screws
Secure covers to brackets using
the provided screws
Adjust the inner panels of the foot
Adjust the inner panels of the foot
6
covers to suit height of range feet.
covers to suit height of range feet.
covers to suit height of range feet.
Adjust the inner panels of the foot
6
covers to suit height of range feet.
Adjust the inner panels of the foot
3
3
Advertisement
Table of Contents
