Table of Contents
Advertisement
4.3
Illustrations of components and dimensions: Dumo and Dumo RF
The built-in mounting feet can fit up to M6 fasteners.
4.4
Cable gland specification
Dumo has two M16x1,5 mm cable glands, capable of accepting cable diameters between 4,5 and 10 mm.
4.5
Terminal cover on the underside of the Dumo
On the underside of the device is a terminal cover with an O-ring. This is used to secure the device electronics
and the terminals.
The screw plug must be opened for electrical installation and should then be tightened and closed with 30Nm.
Figure 2 Dumo main dimensions
Terminal cover
35 mm or 60 mm
two-hole key
½" Ratchet handle
Page 12 | 49
Advertisement
Table of Contents
