Controls; Engine Shut-Off Cord (Lanyard); Engine Oil - Yamaha F20G Owner's Manual

EMU38901

Controls

Tiller handle models:
Move the tiller handle fully to the left and

right to make sure operation is smooth.
Turn the throttle grip from the fully closed

to the fully open position. Make sure that it
turns smoothly and that it completely re-
turns to the fully closed position.
Look for loose or damaged connections of

the throttle cable and shift link.
Remote control models:
Turn the steering wheel full-right and full-

left. Make sure operation is smooth and
unrestricted throughout the whole range
with no binding or excessive free play.
Operate the throttle levers several times to

make sure there is no hesitation in their
travel. Operation should be smooth over
the complete range of motion, and each le-
ver should return completely to the idle po-
sition.
Look for loose or damaged connections of

the throttle and shift cables.
ZMU08748
EMU36484

Engine shut-off cord (lanyard)

Inspect the engine shut-off cord and clip for
damage, such as cuts, breaks, and wear.
1. Clip
2. Engine shut-off cord (lanyard)
EMU40994

Engine oil

(1) Place the outboard motor in a vertical
position (not tilted). NOTICE: If the out-
Operation
ZMU08749
ZMU08750
1
2
41