Table of Contents
Advertisement
When using your burner, you can choose to
use the inner burner only or both the inner
and outer burners as desired.
LOW
1
MEDIUM
2
LOW
MEDIUM
3
12
USING YOUR BURNER
HIGH
OFF
HIGH
Inner and outer burners
Push the dial down and turn counterclockwise
to the highest heat setting
lit, hold the dial down for a further 3 seconds.
A clicking sound should be present when
igniting the burner. If no clicking is present,
turn the dial clockwise back to
refer to 'Troubleshooting'.
Setting both the inner and outer rings
Turn the dial to any heat setting between
and
MEDIUM
HIGH
If the flame on the outer ring appears to
flutter, turn the dial towards
Setting the inner ring
Turn the dial to any heat setting between
and
before releasing.
MEDIUM
LOW
Inner burner only
Once the burner is
.
O (OFF)
before releasing.
to stabilise.
HIGH
and
Advertisement
Table of Contents
